- new modules/probes/ parses probes.yaml (libyaml): a defaults: map
applied on every jtag_open + named profiles: selected with
`jtag_open <idx> <profile>` (jtag_profiles lists them); each value is
pushed into the script envvar store the driver reads at open time
- ships a flashpro profile (ADBUS4 high-Z) that lets the IGLOO2 kit's
embedded FlashPro (FT4232H, port 0) detect the chain
- CLAUDE.md: decision entry for probes.yaml + a design note on the
probe / JTAG-link / device config strategy (driver-neutral link layer)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Lets a session hand a probe back (frees its USB handle) without opening
another, e.g. to flash two FPGAs on different probes in turn:
jtag_close, then jtag_open the next one and jtag_autoinit. Mirrors the
DeInit teardown jtagcore_loaddriver already does when switching drivers.
Also fix the help printer: no-arg commands (whose params slot is "")
printed an empty body because "" was treated as the terminator. Params
are now optional and the description always shows.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- registry moves from the array in fpga.c to fpga_registry.yaml at the
repo root, parsed via libyaml (pkg-config yaml-0.1); adding a part is
now a YAML edit, no rebuild
- looked up CWD-relative (like bsdl_files/), overridable with
$BS_FPGA_REGISTRY, loaded lazily once; public API unchanged
- fpga_list shows the source file (fpga_registry_source())
- add microsemi_igloo2/smartfusion2 and lattice_machxo2/3 families,
ready for the non-Xilinx targets
- docs updated: CLAUDE.md, README, tutorial "add a target" walkthrough
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Reflect what now works: per-FPGA registry, BSCAN proxy SPI bridge, and
flash detect/read/erase/program/verify (~100 KB/s). Switch the typical
flow to the proxy path, add the fpga/bscan/flash command rows, note
persistent history, the KU040 BSDL, the new modules + bscan_proxies/ in
the layout, and the quartiq MIT proxies in the license section.
The driver dlopen's libdjtg/libdmgr and degrades to "no probe" if
they're absent, so building it in has no cost or dependency.
BS_ENABLE_DIGILENT now defaults ON on UNIX (needs <dlfcn.h>); disable
with -DBS_ENABLE_DIGILENT=OFF. Docs updated; also fixes the quartiq
license note in CLAUDE.md (MIT, not BSD-2).
Drop the get_/set_/_pin/_list noise from the JTAG commands (e.g.
jtag_get_probes_list -> jtag_probes, jtag_set_spi_cs_pin -> jtag_spi_cs,
jtag_spi_rd_wr -> jtag_spi_xfer). jtag_open_probe -> jtag_open (not
jtag_probe, which would clash with jtag_probes under tab-completion).
Hard rename, no aliases. Updates the state-dump emitter, help text,
example script and docs accordingly.
CLAUDE.md/README/tutorial: optional BS_ENABLE_DIGILENT backend, why
SMT2 modules need libdjtg, and the new jtag_open_probe index. Mark
phases 2 and 2.5 done.
doc/tutorial.md walks from probe detection to JEDEC ID over EXTEST and
forward-references the BSCAN proxy path. Includes:
- prerequisites and build/launch
- chain scan, FPGA identification, registry lookup
- IR/DR primitive sanity check via the IDCODE register
- SPI JEDEC ID over EXTEST (with the speed caveat)
- recipe to add a new FPGA target
- troubleshooting cheat sheet
README and CLAUDE.md updated to point at it.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
